How do you adjust the Transmission Frequency Channel for Kelvin Hughes SharpEye Radars?

The Kelvin Hughes SharpEye radar system allows the operator to select a Transmission Frequency from a set of channels (S-band = 8, X-band = 14). These values are selected from the Coarse RF Tune Slider under the ‘Tx/Rx’ Panel in the RDOP Maintenance Panel.

The Coarse RF Tune Slider ranges in values from 0 to 255; this range is divided evenly by the number of available channels which provides the range of values that map to a specific channel. For instance: 256 / 8 = 32 therefore Channel 1 = 0 to 31, Channel 2 = 32 to 61, etc.

Note: The Tune needs to be set to Manual before you can adjust the Coarse RF Tune Slider.